|
Advantages and Benefits :
Ultrachem is one of the oldest and largest independent producers
of synthetic lubricants in the USA with world-wide distribution.
As a private employee owned company-not under the aegis of a
multiproduct conglomerate-Ultrachem can offer “premium
grade” lubricants, as measured by ASTM test methods at
realistic attractive prices.
The Reasons for Using
Chemlube Synthetic Compressor Oils Instead of Petroleum are Clear
:
Extended oil
change intervals
Eliminate
seasonal oil changes
Extremely low
deposit formation, excellent oxidation stability and high flash
points means valves stay clean and carbon free.
Reduces
electrical energy costs by an average 6.7 to 8.3% as represented
in field tests
of 35 compressors.
Transfers heat better, thus units run cooler and
last longer.
High
detergency means clean intercooler and aftercooler.
Approved for
use in most air compressors.
Choice of
USDA H-1 or H-2 authorized oils.
Five
viscosity grades - SAE 10, 10W-20, 20, 30 and 40.
Reduced feed
rates on reciprocating compressor cylinders due to increased
polarity and high film strength of
Chemlube synthetics means less lubricant vaporizing into the air
stream.
Cost
effective lubrication.
Reduce
pollution by having less oil to dispose off.
Lower
volatility--cleaner, safer down-stream air.
Low toxicity.
Easily
recycled or re-refined.
Chemlubes, 100 % synthetic
compressor oils, are specially formulated with diester base oils
for use in a wide variety of air compressors. With years of
successful use behind them, Chemlube® formulated for long life in rotary screw type
compressors. Chemlubes are designed for cold temperature use
where compressors are exposed to ambient temperatures below 30º
F
. They are formulated for upper cylinder
and crankcase lubrication of reciprocating units. Chemlubes are
ideal for use in sliding vane units as well.
Characteristics
Rotary Screw compressors.
Useful
life-Scheduled changes can be extended to 4000 hours in rotary
vanes and 8000 hours in
rotary screws. Reciprocating and
sliding vane.
Useful
life-Scheduled changes can be extended to as much as 8000 hours
for crank-cases.
Chemlubes are excellent vacuum pump
oils for reciprocating vacuum pumps.
CVC
VISCOLUBE (HT)
Synthetic
Oil for Textile Stenter
This a Fully synthetic chain oil, specially designed for lubrication of stenter chains, to provide high tempreture, anti-wear performance. It is a synthetic oil which does not leave any carbonaceous deposit and due to very low friction, it reduces the current requirement of stenter drive. It is used for all types of stenter including heat setting types upto 240º C and therefore more suitable for higher temperature application and longer duration applications than conventionally used chains oil. It is also used for synthetic leather cloth stenter applications and circular looms. Other uses that it can be used for high temperature conveyor bearings of paint ovens and furnaces etc.
Benefits :
Lowers energy Consumption
Reduces
friction and wear.
Acts as clean
non-carbonizing Lubricant to prevent jamming.
Operates at
very high temperatures.
Reduces
maintenance down time.
Packing : 5-litre Carboy, 25-litre Drum and 200-litre Drum.
Profile | Products | Whats New | Contact Us
