Cleaners

Fusing belt Cleaner

CVC TEXKLEEN is a non-flammable, non-hazardous product that is inherently biodegradable and will remove all dust, dirt, fluff and other contaminants such as oil, grease, waxes and silicones and adhesives. It is especially formulated for removing all contaminants and sticky adhesive deposits from the Fusing Belts. It is also used for the cleaning of Cots & Aprons of Ring frames to decrease static electrical charge and prevent ballooning effect.

Benefits:

  • It is anti-static, non-staining, non-sticky and quick drying.
  • Removes all gummy and carbon deposits.
  • Forms protective layer on rubber belts to prevent gummy deposits, starchy materials etc. from sticking directly on the belt.
  • Extends fluff cleaning interval between lapping.
  • Protects rubber belts from weathering effects.

Application:
It is used for cleaning adhesives from Teflon/ Rubber belts of continuous collar/cuff/ belt-roll of Fusing machines. Sprays on contaminated and dirty surfaces and allow it to work for a short time after which the components can be wiped off i.e. Cots & Aprons, Top & Bottom rollers, Guide rolls of draw frames, speed frames, ring frames.

Unit Packing: 550-ml. Aerosol Tin.

(Cleaner-cum-Lubricant for Embroidery & Flat Knitting Machines)

CVC EMBROLUBE is a high quality synthetic oil for the lubrication & protection of delicate parts & mechanisms such as needles, hooks, latches, light bearings, gears etc. of Embroidery machines. It is also formulated for the lubrication of modern Sewing machines and the needles of Flat Knitting machines to provide long life and extremely low friction performance.

APPLICATION FOR USE:
Spray directly to the parts to be cleaned & lubricated. Use extension tube for parts that are not easily reachable.

PACKING: 550-ml.Aerosol Tin

(Instant Stain Remover)
CVC SR-100 is a fast acting effective stain removing spray which removes oil and grease spots from cotton, woolen, rayon & synthetic fabrics.

APPLICATION METHOD:

Spray CVC SR-100 directly on the oil spot and wet it thoroughly. Allow SR-100 to work for a few minutes on the spot till a dry patch appears. Tap the patch gently and shake off any residue from the spot area. Use steamer over the spot area till the spot disappears completely. Where steamer is not available, steam iron may be used repeatedly till the spot disappears.

BENEFITS:

• Effective stain removing spray
• Removes oil and grease stains from fabric instantly

Note:

CVC SR-100 is not recommended for removing rust, tea-coffee, blood or food stains.
Other grades available for removing rust, blood, tea-coffee stains.

PACKING: 550-ml. Aerosol Tin

(Cold cleaner/degreaser)
CVC SAFEKLEEN is non-flammable, non-hazardous product that is inherently biodegradable and will remove all petroleum based contaminants such as oil, grease, semi-cured varnish and paint, waxes and adhesives, silicones and oil based inks. It is based on specially formulated high quality natural oil extracts and derivatives with ozone safe solvents and it is environment friendly.

BENEFITS :

  • Excellent fast acting cleaning power.
  • Inherently biodegradable solvent.
  • Non-flammable, non-hazardous non-toxic, non-irritant, with pleasant fragrance.

APPLICATIONS :
Can be used in dip bath or hand sprayed, sparingly on to contaminated surface and allowed to work for a short time after which the components can be wiped free of contaminants or water rinsed if desired.

PACKING : 550-ml. Aerosol Tin and 5-litre carboy.

Oils

Semi-synthetic Gear Oil

SYNOL GEARLUBES is semi-synthetic gear oil formulated with latest additive technology with friction modifiers to provide high performance, long life and energy saving properties, which are not available from conventional lubricating oils. In addition it has got anti-foaming, demulsibility and E.P. additives for heavy duty lubrication. SYNOL GEARLUBES are series of Gear oils having viscosity range of (100cst – 460cst) for different applications.

AREA OF APPLICATION :

Enclosed Gear drives, Windmills, Transmission chains, Heavily loaded low speed antifriction bearings, Centralised lubrication systems, As a running-in-oil for OEMs, Heavy duty Earth moving and Excavating equipments.

BENEFITS :

  • Extends drain intervals.
  • Reduces wear and tear.
  • Wide operating temperature range.
  • Reduces power consumption

PACKING : 27-litre Drum & 210-litre Drum.

Synthetic Thread lubricant

CVC SILICONER OIL is specially formulated silicon oil with additives suitable for thread and yarn lubrication for stitching and embroidering machines. It is non-staining, non sticking long life lubricant which does not allow cotton fluff, dirt and dust to stick to the needles, thus ensuring long needle life. It reduces operating temperature of needles.

PACKING: 100-ml.plastic bottle with dropper and 1-litre bottle.
SHELF LIFE: 1 year when properly stored. (Store in a cool place)

Synthetic Stitching Oil

CVC STITCHLUBE is a fully formulated stitching oil, specially designed for the lubrication of modern sewing machines such as JUKI, PEGASUS, PFAFF, SUNSTAR, SIRUBA, SINGER, BROTHER, YAMOTO, REECE, RIMOLDI etc. It lasts much longer then the conventional petroleum oils. Because of its low friction, it reduces power consumption. It is a non-staining oil. It does not leave any carbonaceous deposit and reduces maintenance costs considerably. The oil is completely water washable and it does not leave any stain after the fabric is washed. It is available in different viscosity grades if required.

BENEFITS :

  • A non-staining oil and self-cleaning oil.
  • Having antistatic and antirust properties.
  • Does not leave any carbonaceous deposit.
  • Extends needle life.

Note:-
For best results, it is necessary to flush out the previously used oil and clean the machine for 30 minutes with our FLUSHKLEEN Oil before switching over to our Synthetic oil STITCHLUBE in the Sewing machines.

PACKING: 27-Litre Drum & 2 10-Litre Drum

Greases

CVC VISCOLUBE(T) is a non-dripping, non-staining lubricant which sprays like oil but sticks like grease. It is particularly useful for textile industry where it prevents spotting of fabric by clinging to high speed rubbing surfaces. Because of its easy washability, it is also useful lubricating open gears, vertical guides etc. in food pharmaceutical, cosmetic and paint industry where cleanliness is of extreme importance.

AREA OF APPLICATIONS: Conveyor bearings, chains, open gears, mixers, agitators, vertical guides, reciprocating parts, wire drawing, die casting, glass molding, punching, stamping, machining, dyeing and printing machines, dryers, evaporators, packing and filling machines, etc.

BENEFITS:
• Non-Dripping
• Non-Staining
• Anti-static
• Mold Release
• Water Repellent
PACKING: 250-ml. & 550-ml. Aerosol can

Coatings

Cleaner cum Lubricant for Embroidery and Flat Knitting machines

Emrolube is a highly purified synthetic oil for the lubrication and protection of delicate parts and mechanisms such as needles, hooks, latches, light bearings, gears, etc.

Applications:

Spray directly to the parts to be cleaned and lubricated. Use extension tube for parts that are not easily reachable.

Synthetic Oil for Textile Stenter

This a fully synthetic chain oil, specially designed for lubrication of stenter chains, to provide high tempreture, anti-wear performance. It is a synthetic oil which does not leave any carbonaceous deposit and due to very low friction, it reduces the current requirement of stenter drive. It is used for all types of stenter including heat setting types upto 240º C and therefore more suitable for higher temperature application and longer duration applications than conventionally used chains oil. It is also used for synthetic leather cloth stenter applications and circular looms. Other uses that it can be used for high temperature conveyor bearings of paint ovens and furnaces etc.

Benefits :
 Lowers energy Consumption
Reduces friction and wear.
Acts as clean non-carbonizing Lubricant to prevent jamming.
Operates at very high temperatures.
Reduces maintenance down time.

Packing: 5-litre Carboy, 25-litre Drum and 200-litre Drum.

Lubricants

Synthetic Thread lubricant

CVC SILICONER OIL is specially formulated silicon oil with additives suitable for thread and yarn lubrication for stitching and embroidering machines. It is non-staining, non sticking long life lubricant which does not allow cotton fluff, dirt and dust to stick to the needles, thus ensuring long needle life. It reduces operating temperature of needles.

PACKING: 100-ml.plastic bottle with dropper and 1-litre bottle.
SHELF LIFE: 1 year when properly stored. (Store in a cool place)

(Cleaner-cum-Lubricant for Embroidery & Flat Knitting Machines)

CVC EMBROLUBE is a high quality synthetic oil for the lubrication & protection of delicate parts & mechanisms such as needles, hooks, latches, light bearings, gears etc. of Embroidery machines. It is also formulated for the lubrication of modern Sewing machines and the needles of Flat Knitting machines to provide long life and extremely low friction performance.

APPLICATION FOR USE:
Spray directly to the parts to be cleaned & lubricated. Use extension tube for parts that are not easily reachable.

PACKING: 550-ml.Aerosol Tin